No wonder air conditioning installation also has a lot of "says"

Many of my friends do not know, in fact, an air conditioning performance play presentation and, to a large extent, the effect of air conditioning installations, and industry's "one-seventh of the installation of quality" is not entirely undeserved.

Although low season number not so much purchase, but some of the air conditioning installation is ignored.

Today, edit it for everyone to bring air conditioning installation notes. Interested friends don't miss it.

Installation position: should take full account of the space position and layout so that reasonable, open air distribution.

These places are best to avoid: inflammable gas leak or strong corrosive gases; artificial electric and magnetic fields directly effects; easy to produce noise and vibration (for example: air conditioning, in protrusion of the balcony will produce strong resonance and noise. General on the bedroom window, window, wall, will significantly reduce noise. And on Windows the following arm, after cleaning, maintenance, set air conditioning mask or something, all conveniently); place where natural conditions (such as smoke, wind, sand is extremely easy to damage to the air conditioning, direct sunlight or high temperatures, heat makes the air conditioning is not timely, not cold); children's easy-to-reach places. Furthermore, it is best not to be installed on a rainy day in the snow. Air-conditioning outdoor unit should, as far as possible away from the adjacent side of doors and Windows and green plants, and relative distance from the square Windows and doors must not be less than the following values: air conditioner rated cooling capacity not greater than 3 meters of 4.5KW, greater than 4 metres of 4.5KW. Installation of the surface should be firm, with sufficient capacity. For example, narrow room, indoor machine should avoid installation in "short wall", and you want to install in the long wall. Because indoor unit mounted on the wall of the "short" easily lead to short circuit the wind, which would affect the refrigeration effect. Mounting surfaces for building the old wall or roof, must have a solid brick, concrete or its intensity equivalent of mounting surfaces. Hold up air conditioning brackets should also pay attention to quality. Pipeline connection have controland.

Air intake and exhaust copper tube like transportation artery blood circulation, does not allow any concave point, sand, and other defects, or that it does not work.

It and indoor and outdoor machine interface connections, is the key to air conditioning installation is also the most reflect the Installer technology strength. Copper tube trumpet connection to alignment, straighten, trend and curvature to be reasonable, a compaction force should be just enough to succeed, requires much easier to remove the split, gives the small will leak fluoride (International allowed leakage rate is 3 percent to 5 percent). Through the free space in the building's air conditioner connected pipeline, its installation height is apart from the ground should not be lower than 2.5 m.

The pipeline is stuck to the ceiling mounting or authorized by the Department concerned.

Air conditioning of the pipeline through the brick, concrete structure should be casing, and should take proper insulation and support measures to protect against vibration or corrosion damage and should be checked regularly. Connection pipes should not be blocked channels, generally should be through the roof surface, or shall take appropriate measures to leak resistance and electrical insulation.